QC field copy
The full inspection package for the field inspector, with hold points and a field-change log.
- Logs, line class and NDE requirements
- Walkdowns and test record
- Issued to a named inspector
§00Specialty welding & mechanical
Every weld,
proven.
NODARC welds, fits, sets, bolts, machines and tests piping systems for facilities that cannot fail. Every joint runs through NODARC Nexus, our own quality system, so the record is complete the day the system is.
Data centersSemiconductorPharmaceuticalIndustrialMilitary & Air Force
W-05Accepted
- Line
- 8"-CHWS-201-A1
- WPS
- NDC-WPS-001
- Fit-up
- QC released
- Root · cap
- W2 · W2
- Visual
- Accepted
- RT
- Accepted · RT-0118
Package TP-CHW-201 · sample record, fictional data
Fig. 01 · Isometric · 8"-CHWS-201-A1Weld-by-weld record
05Markets: data center, semi, pharma, industrial, military
08Service lines, scoped line by line
06Quality gates, contract to clean
100%Of joints recorded in Nexus
Codes we build toASME B31.3B31.1B31.9ASME BPEBPVC Section IXAWS D1.1API 1104ASME PCC-1
§01Where we work
Five markets. One standard of care.
Each market fails in its own way: an outage, a particle, an audit finding, a leak, a breach of base rules. We plan the work around the failure the owner fears most.
- 01
Data centers & critical facilities
Chilled and condenser water, cooling loops and CDU connections, generator fuel. Tie-ins beside live systems under owner-approved methods of procedure, with foreign-material control and commissioning-ready records.
The failure: an outageASME B31.9 · B31.3 · owner MOP - 02
Semiconductor
Stainless process and utility piping, bulk gas, process cooling water and clean dry air, built with purge control, contamination discipline and coupon records under the owner's cleanroom protocol.
The failure: a particleASME B31.3 · SEMI F78 / F81 - 03
Pharmaceutical & life sciences
Purified water, WFI, clean steam and CIP stainless, with weld logs, borescope records and good documentation practice that support the owner's validation.
The failure: an audit findingASME BPE · AWS D18.1 / D18.2 - 04
Industrial process
Refining, chemical, ammonia and LNG piping, tie-ins and equipment, including turnarounds and outages, with PWHT, PMI and controlled bolting.
The failure: a leakASME B31.3 / B31.1 · API RP 578 · ASME PCC-1 - 05
Military & Air Force bases
Central plant, hangar, utility and fuel piping on Air Force installations, with an accident prevention plan, activity hazard analyses, base-access discipline and complete submittals.
The failure: a breach of base rulesUFGS / UFC · USACE EM 385-1-1
§02Proprietary · built by NODARC
NODARC Nexus.
The quality system behind every joint.
Most contractors assemble the turnover book at the end. We build it as we weld. Nexus links every weld and flange joint to its drawing, material, procedure, welder, inspection, NDE and test, so nothing is reconstructed later.
1record per weld, from fit-up to turnover
11controlled stages for every test package
19tab turnover book, built as the work happens
The whole job on one screen: welds, NDE backlog, package pipeline, welder continuity and expiring certificates.
§03How a package moves
From drawing to turnover in eleven controlled steps.
Every test package follows the same path. Each step has an owner, a record and a signature, and the next step waits until the last is closed.
1
BuildIsos, welds and joints assembled2
Issue for reviewPackage and transmittal to you3
Your reviewAccepted or returned with comments4
Release to fieldIssued for construction5
Weld & inspectFit-up, visual, every weld6
NDE clearedSelections, tracers, repairs closed7
Pressure testWitnessed, calibrated gauges8
Final walkdownPunch cleared, signed by QC9
Signatures reviewedEvery slot checked10
TurnoverFinal book to you11
Close-outFiled, logged, transmittedNo hot work before release. Welding starts only after you have accepted the package and it has been released to the field, with controlled copies in the hands of QC and the foreman.
G1ContractCode, spec and scope confirmed
G2SubmittalsWPS, welder quals and ITP approved
G3MaterialMTRs and heat numbers verified
G4Fit-upQC release before the root pass
G5WeldVisual and required NDE accepted
G6Test & cleanPressure test and cleanliness signed
§04Controlled documents
Three binders. Never confused, never out of date.
Once you accept a package, QC issues numbered field copies to the people doing the work. Each is logged to its holder, and a new revision voids the old one.
Production field copy
What the crew needs at the work and nothing it doesn't, with a stop-and-call-QC page.
- Isos and bill of materials
- Production weld list and bolt-up worksheet
- WPS at the work face
Final turnover book
Every tab from cover to correspondence, with contents, dividers and digital signatures.
- Checked for open items before it prints
- Delivered with a signed transmittal
- Filed with the weld and NDE log
§05For our clients
Your project, live.
Every client gets a private portal that shows their project and nothing else. Open it from a QR code on your phone or at your desk.
- Progress you can check. Welds welded and accepted, NDE results and reject rate, packages tested and turned over.
- What's waiting on you. Packages to review, tests to witness, turnovers to accept.
- Every package, stage by stage. A timeline from build to close-out, with every transmittal we sent.
- Shift reports on request. A one-page start- or end-of-shift summary from our QC manager: what was welded, tested and turned over, and what QC is on next.
- Private by design. View-only, shared with your team alone, updated by NODARC QC every week.
§06What we do
Eight service lines. Clear scope on every proposal.
Every proposal names the lines included and exactly where our scope begins and ends.
L1
Specialty pipe welding
Carbon and stainless pipe, shop and field. GTAW roots, GTAW/SMAW combinations, tie-ins and repairs.
L2
Fabrication & pipe fitting
Spools, manifolds and supports fitted to isometrics, with heat numbers carried onto every piece.
L3
General mechanical & equipment
Setting, leveling, aligning and connecting pumps, skids, exchangers and packaged units.
L4
Piping installation & testing
Field installation and tie-ins, hydrostatic and pneumatic testing to approved test packages.
L5
Torque & tensioning
Controlled bolting with calibrated hydraulic tools, sequenced passes and tagged joints to ASME PCC-1.
L6
Field machining & millwright
Flange facing, cold cutting and beveling, baseplate and coupling alignment with recorded readings.
L7
Project management
Look-ahead schedules, written change control and a weekly progress and quality report.
L8
Quality documentation & turnover
Weld maps, weld and flange logs, NDE coordination and indexed turnover packages by system.
Not in our scope: design and engineering, structural steel erection, electrical work and alkylation-unit services. When a project needs them, the proposal names who provides them.
§07Where we stand
New company. Every capability shown at its current status.
Quality is led by AWS Certified Welding Inspectors, independent of production. Our own project record starts with our first job, and we are glad to begin with a scope sized to our current capacity.
| Welding process | Application | Status |
|---|---|---|
| GTAW / SMAW | P1 carbon steel pipe, all positions | In qualification |
| GTAW | P8 stainless pipe with argon back purge | In qualification |
| SMAW | Uphill E6010 / E7018; downhill E8010-P1 | In qualification |
| Orbital GTAW | 316L high-purity and ASME BPE hygienic tube | Planned |
| Nexus | Quality system, field copies and client portal | In use |
§08Contact
Send us your drawings.
We respond with a written proposal that states exactly what is included and excluded, the schedule basis and our time-and-material rates. To quote accurately, send:
- Drawings and specifications, with revisions
- Scope, quantities and governing code
- Site, schedule and any outage windows
- Your prequalification platform, if you use one
Phone
Bids & RFQs
Careers
Ask for our capability statement, quality manual, safety programs or prequalification package.